Pay in installments of $32.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 30 - Sep 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Metallic Midnight Purple PPF | Self-Healing TPU Color FilmMetallic Midnight Purple shifts between a deep near black violet in the shade and a rich sparkling purple under direct light. The fine metallic flake catches the sun and gives the car real depth, so the color reads bold up close and clean from across the lot. It works on everything from a daily sedan to a show build, and it pairs especially well with black or chrome trim. This is paint protection film, not vinyl. While it lays down that custom purple
Metallic Midnight Purple shifts between a deep near-black violet in the shade and a rich sparkling purple under direct light. The fine metallic flake catches the sun and gives the car real depth, so the color reads bold up close and clean from across the lot. It works on everything from a daily sedan to a show build, and it pairs especially well with black or chrome trim.
This is paint protection film, not vinyl. While it lays down that custom purple finish, the same 7.5mil TPU layer is taking the hits from rock chips, road grime, bug acid, and scratches. You change the color of your car and shield the factory paint underneath at the same time, with one film.
Key features
- Self-healing topcoat: minor scratches and swirl marks fade out with heat from the sun or a heat gun.
- Hydrophobic surface: water and dirt bead off instead of sticking, so the film stays cleaner for longer.
- Acid rain and oxidation resistant: holds up against acid rain, oxidation and yellowing over years of daily driving.
- Stain and penetration resistant: bird droppings, tree sap and grease do not soak into the film.
- Flexible and tear resistant: high elongation and tensile strength let it stretch over curves without cracking.
- Mirror-gloss finish: the glass-crystal top layer boosts paint depth and gloss by up to 40 percent and smooths out orange peel.
- Removable adhesive: peels off cleanly with heat, with no glue residue left behind.
- Bubble-free install: designed to lay flat without bubbling, warping or lifting at the edges.
The Wrapteck 3-layer TPU structure
Specifications
| Material | TPU (thermoplastic polyurethane) |
| Thickness | 7.5mil (330 ± 10µm) |
| Structure | 3 layers |
| Raw material | Lubrizol TPU resin |
| Adhesive | Ashland acrylic adhesive |
| Topcoat | Cashew-based coating |
| Application | Wet install |
| Roll width | 1.52m (5ft) |
| Roll lengths | 3m, 6m, 9m and 15m |
| Warranty | 8 years |
Lab test report
| Test | Result | Method |
|---|---|---|
| Thickness | 330 ± 10µm | Mitutoyo thickness meter |
| Elongation at break | 100N | ASTM D624-2000 |
| Puncture resistance | >15N | GB/T 10004 |
| Tensile strength | 25MPa | ASTM D638-2014 |
| Finished film elongation | >300% | ASTM D882 |
| Max operating temperature | 100°C to 120°C | GB/T 7141-2008 |
| Anti-yellowing | B value <5 | GB/T 16422.3-2014, QUV 5000 hours |
| Adhesive hold strength | >2200g | GB/T 4851 |
| UV resistance | 95% to 98% blocked | GB/T 2680 |
| Gloss level | 95GU | 3NH gloss meter, 60 degree |
New to wrapping?
If this is your first film, start with our guide on how to wrap a car. This is a wet-install film, so you can do panels and accents at home, and a professional installer is the safest route for a full-car wrap.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Awesome filter! Nasty campground water no longer...
Style: Standard Filter
I have run these for years in my RV and they work killer! Here's some more in-depth thoughts:
Pros:
- These work better than I had expected. Just hook them up to the water source, hook your hose to it, run it to your trailer and viola` clean and good tasting water. Some of the places we have visited have had water that I wouldn't feed to my worst enemy. With this thing attached, it's very good tasting.
- I like the hose attachment that comes with this to aide in adding flexibility to the system and not put too much strain on the system. I have bought so many of these, I now use one attaching the filter to the nozzle, one out of the filter to my hose, and one attaching my hose to the trailer.
Notes:
- I will note that the manufacturer suggesting using these for only 1 camping season, and this makes sense. That's what I do, and it seems to work out great. It's not too much $ to replace every season.
- Another note, when first putting this filter into service (just the first time of the season, subsequent hook-ups wont do this) there will be a bunch of carbon (black in the water) that comes out of the faucet in your trailer. This is perfectly fine, safe, and of no issue. This is the filter breaking in and getting the extra carbon out of the system. There is no health concern with this happening. I just run the faucet until it clears up, and then we're good to go for the rest of the season.
- Last note, when we unhook from our camping spot, I swing the filter in my hand with my arm extended (using centrifugal force, not centrifical, look it up) to get the residual water out of the filter so it doesn't sit in there and spoil. I do this until I get most of the water drops to stop, leave it out on the counter to dry, and boom, it's perfect the next time.
Cons:
- None to report
Overall this filter does a great job taking care of some seriously nasty campground water that we've encountered all over the Southwest US. I cannot recommend it any higher.
I hope I have helped your purchasing decision of this product. I am not affiliated with the manufacturer, seller or any other product related company nor am I under any obligation to write this review. I do this for my own fun and to help others in the Amazon Community! Feel free to comment and let me know if I have helped you, and please note below if this review was able to help. If you should have any questions, please post them below in the Comments. I try to answer all inquires in a timely fashion to the best of my ability.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2017
★★★★★ 5
Clean, Great-Tasting Water Made Easy with Camco Tastepure
Style: Standard Filter
I installed the Camco Tastepure RV inline water filter on our rig, and it’s another example of why I’ve come to trust Camco products. The reinforced strain relief hose is a small but incredibly smart feature—it keeps the connection between the filter, hose, and RV kink-free and easy to manage. Setup was simple, and the whole system feels sturdy and well-designed.
A tip I’ve learned through experience: before putting a new filter into service, run water through the internal charcoal filter for 30 - 45 seconds. This flushes out any loose charcoal bits and ensures the first water you drink is crystal clean and tastes amazing. After that, connecting to the RV is straightforward, and you immediately notice how much better the water tastes.
Whether filling up a glass or cooking, it’s made a real difference in our RV experience. Reliable, easy to use, and excellent tasting water every time - I highly recommend this to any RV owner who cares about water quality on the road.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 10, 2026
★★★★★ 5
Works as designed
Style: Standard Filter
Works as designed. No issues or defects.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 2, 2026
recommand products
Artiss Bathroom Storage Cabinet 2-Tier Slim Toilet Organizer Adjustable White
46.00
Ravensburger The Book Palace Puzzle 1000pc - Damaged Box
32.00
Artiss Bookshelf CD Storage Rack - BERT Black
120.00
Artiss Computer Desk Swivelling L shape Home Office Storage Cabinet Oak
195.00
Playmobil Advent Calendar Adventures of Ayuma
58.00